craigslist | tools in modesto

Snap-on box (modesto) $800

2008-05-15T08:29:37-07:00

Used box very big and heavy 5foot6 in heigth 3feet width 22" deep 2boxes in good condition please call 209-681-2801.

shop vac (modesto) $25

2008-05-15T07:26:22-07:00

shop vac works good i have all attachments 25.00 209 595 7257

electrical boxs (modesto) $40

2008-05-15T07:25:13-07:00

electrical boxes for generators 40.00 each i have 7 must go 209 595 7257

4' ladder (modesto) $20

2008-05-15T07:24:31-07:00

4'ladder 20.00 209 595 7257

mac tools box (modesto) $80

2008-05-15T07:22:30-07:00

mac tools box 80.00 209 595 7257

Ridgid 141 Pipe Threader $800

2008-05-15T00:15:12-07:00

Entertaining offers of over $800

Retail value: $2600

Condition: Superb

Ridgid Pipe Vises (Modesto)

2008-05-14T22:01:49-07:00

2 - Ridgid vises 1/2"-4" $25; 1 - Ridgid vise 1"-2" $20; (209) 527-6815

Soldering Torch (LP Gas) w/ extra tank (Modesto) $40

2008-05-14T21:53:05-07:00

(209) 527-6815

Jackhammer, Tamper and Clay Spade (Modesto) $200

2008-05-14T21:48:56-07:00

w/ several extra bits and 2 asphalt cutters; (209) 527-6815

Ridgid Pipe Cutters/Threaders/Reamers (Modesto)

2008-05-14T21:43:52-07:00

Cutter $75; Reamer $70; Reamer $40; 3-way Cutter 1/2" - 1" $100; Ratchet Threader w/ 6 dies $180. (209) 527-6815

Ridgid 65 Pipe Threader (Modesto) $100

2008-05-14T21:32:50-07:00

2 - Jam proof ratchet threaders w/ 1" - 2" dies; $100 each; (209) 527-6815

Ridgid 700 Power Drive (Modesto) $1250

2008-05-14T21:26:54-07:00

w/ 1/2" thru 2" drop head dies; metal case; (209) 527-6815

Backflow Test Gauges (Modesto) $500

2008-05-14T21:20:52-07:00

Midwest #890 w/ accessories; and Midwest #830 w/ accessories. (209) 527-6815

Dewalt saw/drill combo and Porter cable drill (Modesto)

2008-05-14T21:18:58-07:00

I have a 12 volt dewalt saw/drill combo kit and a 12 volt Porter Cable drill that I am looking to trade for a Zune Mp3 player. The saw works great but I think the batteries could be refreshed. The drill work too but I think the brushes may need to be replaced because it cuts in and out, which is why I am including the Porter cable drill and charger, this drill and battery work great. Email me with any questions. Thanks

Ridgid cordless snake (Modesto) $150

2008-05-14T21:12:31-07:00

w/ case, cartridges and charger. (209) 527-6815

Brand-new lawnmower, Homelite weedeater.

2008-05-14T20:24:02-07:00

I have a brand-new lawnmower side discharge in the original carton unopened which I'm selling at $115, I also have a homelite weedeater which I am selling it for $55. If you are interested in either one of them call me at 209-346-4318.

Hitachi (Merced) $75

2008-05-14T19:30:09-07:00

5 Hitachi NR90AC Round head common nailers.

Makita DPC 7311 Cut-Off Saw (Murphys) $350

2008-05-14T19:06:56-07:00

This is a Makita DPC 7311, 14" cut-off saw in excellent condition. The Dewalt diamond blade is nearly used up but the saw is nearly new with very few hours on it. Starts right up and runs like new....which it nearly is. The price is firm. I will not ship this item. I will only take cash and if you want it you will have to come get it. This is a beautiful saw.

4800 Generator-110 VAC-220 VAC-12 V DC-5500 PEAK WATTS (MODESTO) $285

2008-05-14T18:03:32-07:00

THIS CHAMPION 5500 UNIT STARTS ON FIRST PULL AND RUNS EXCELLENT. USED VERY LITTLE. lOCATED IN MODESTO.

tire machines/ balancers/compressors-much more! (central valley)

2008-05-14T15:57:40-07:00

coats rim clamp 5060e & 5060ax 20-22"

coats balancers 950. & 1001 refurbish - great!

john bean tire machine/ 18"/ work benches (steel)

champion compressors/ vr 7-12 vr -1012 both 2900.00

midtronics battery charger i900/air guns/tool caddies

john bean aligner v-9 like new ( 7900.00) firm

scott 559/ 707-4124

24 FOOT ALUMINUM EXTENSION LADDERS/4 FOOT FIBERGLASS LADDERS 14 TOTAL/ (TURLOCK) $20

2008-05-14T15:27:58-07:00

HAVE 9 - 4 FOOT LADDERS FIBERGLASS 20.00 EACH AND 4 -24 FOOT ALUMINUM EXTENSION LADDERS ALL WERNER BRAND 60 .00 CALL 209-613-5226

SNAP-ON/MAC TOOLS!!! MUST SELL!!!! (Manteca) $1

2008-05-14T09:54:19-07:00

I have thousands of dollars invested in almost every Snap-on/Mac tool you can think of. I have way too much to list. I am willing to sell as a whole (including brand new HUGE black Mac double stack box) or to just sell you what you need at an agreed upon price. Everything I have is either brand new or in mint condition. I have several impact guns, air ratchets, butterflys, etc... I also am selling a 40 gallon Snap-on air compressor that cost me over $2500.00. I can be reached anytime at (530)921-4555 if you are interested. I would be willing to make someone a really great deal on the entire package if they are interested in starting a shop, or purchasing a complete set of the best quality tools made. Again. I have way too much to list, (including thousands in specialty tools), so give me a call if there is something your looking for, or if you would like to get together and see what I have for sale.

trailer (modesto) $300

2008-05-14T09:31:18-07:00

My wife and I are selling this here trailer due to a financial crunch, we are asking $300 and she's well worth it. Please call Juan or tina at (209) 523-4119 or (209) 495-4579.

2 dry wall benches (empire) $50

2008-05-14T07:38:25-07:00

2 pretty new dry wall benches $50.00 each Call 209-480-3327

Pancake Compressor (EMPIRE) $40

2008-05-14T07:35:52-07:00

BRAND NEW - $40.00 - 2 HP includes pressure switch at 80 PSI and pressure switch (unloader) at 170 PSI also includes regulator, 209-480-3327 or 209-578-3327

GUILD A-6 SKILL SAW (MODESTO) $25

2008-05-14T06:33:20-07:00

VINTAGE GUILD 6' SKILL SAW WITH METAL CASE. EXCELLENT CONDITION. COME SEE IT AT THE YOSEMITE FLEA MARKET ON WEDNESDAY (14TH). THE FLEA MARKET IS AT THE 3000 BLOCK OF YOSEMITE BLVD ACROSS FROM SUBWAY SANDWICHES AND TACO BELL. COME EARLY AND GET SOME GOOD BARGAINS...I ALSO HAVE A COUPLE OF SANDERS, A SCROLL SAW, CEILING FAN, GAS GRILL (WITH SIDE BURNER), AN WOODEN ENTERTAINMENT CENTER, AND MANY OTHER TOOLS. ALL IN VERY GOOD CONDITION AND PRICED TO SELL. MY SPACE/CONTAINER IS THE THIRD FROM THE NORTH END. YOU CAN CALL ME 409-9847.
I ALSO HAVE A COUPLE OF GALLONS OF DOT-5 SILICONE BRAKE FLUID (GOVERNMENT SURPLUS)

Leather Tool Belt Holders (Tracy) $40

2008-05-14T03:51:33-07:00

4 leather tool belt holsters. 1 is a holster for a cordless electric drill. 1 is a carpenters tool belt pouch. 1 is an electricians tool belt holder. 1 is for a large pair of pliers. $15. ea or $40. for all of them.

Rocky
925-216-7692 cell
Located in Tracy

snap on tool box (oakdale) $400

2008-05-13T21:08:05-07:00

snap on tool box 3 foot wide two foot deep

vintage craftmans drill (modesto) $25

2008-05-13T20:30:55-07:00

today vintage craftmans drill i'm selling it for 25.00 dollars if you are interested in it give me a call 209-492-0521

6 foot level (modesto ) $40

2008-05-13T18:09:48-07:00

today i'm selling this 6 foot level for 40.. dollars it is 6 foot with a magnet strip on the side of it if you interested in it give me a call 209-492-0521

48" Concrete finisher / Walk behind Concrete saw $200

2008-05-13T16:58:42-07:00

The thing is old but still finish like a new one. I can't do concrete work any more so im selling some of my tools. The saw is a Target minichopper that could use a motor. $200.00 Each Call Mike At 209-605-9800

Nakita Power Drill $30

2008-05-13T16:34:04-07:00

The drill is in good condition works great we just bought different drills. The battery is a 12.2 volt. The price is $30.00

Craftsman Power Drill $30

2008-05-13T16:31:22-07:00

This drill is in good condition has two batteries it comes in its own case the battery is 13.2.

8" High speed Grinder (Manteca) $25

2008-05-13T15:43:04-07:00

selling a high speed grinder that is about 2 months old. Central Machinery brand. Bought a low speed grinder and the low speed works much better for me. The grinder comes with 2 wheels and has a light attached.

craftsman cordless drill (modesto) $20

2008-05-13T14:48:53-07:00

craftsman cordless drill with 2 batteries. Needs a charger, approx. 8 yrs old
industrial 12v call 209 522-9713

Extention Ladder (Ceres, CA) $150

2008-05-13T14:25:09-07:00

Gorilla 4in1 Aluminun fold up heavy duty extention Ladder. Used twice, but has scratches.OSHA approved, 300lb.rating. Extends to 21 feet.Step ladder size at alittle under 6'.Excellent condition.$150.00 or make offer. Also Have Husky across the bed type tool box. This box fits in bet flush instesd of hanging over bed rails.Like new. Paid over $200.00 apiece for each. Box $150.00 or best offer. Will Bargain! Call my cell at 209-872-9025, serious inquirys only need apply.You may call or contact me at Email below at Dwightsheating@aol.com.
Ask for Bob

(GRINDER) ON STAND (EMPIRE) $45

2008-05-13T13:47:51-07:00

NICE LITTLE UNIT WILL NOT BE DISSAPOINTED (209) 496-8406

ENGINE STAND (EMPIRE) $35

2008-05-13T13:45:55-07:00

USED ONE TIME $35.00 FIRM FIRM FIRM (209) 496-8406

(FOLDABLE) CHERRY PICKER (EMPIRE) $100

2008-05-13T13:40:25-07:00

USED ONE TIME AND WILL NOT TAKE A PENNY LESS SO PLEASE IF YOU DONT HAVE $100.00 DOLLARS GO FINANCE ONE (209) 496-8406

(AIRLESS) PAINT SPRAYER (EMPIRE) $175

2008-05-13T13:37:32-07:00

(zip spray 1700) this cost around $450.00 to $500.00 im selling at just a fraction of cost !!!! it takes the hard part of painting away works very good will not be dissapointed call for more details (209)496-8406

hotmop machine (la grange ) $700

2008-05-13T13:05:38-07:00

this hotmop has 2 propane tanks & it on heavy duty trailer call jerry at 209 852-9213

Clipit folding pocket knife (Sonora) $89

2008-05-13T12:41:14-07:00

Clipit folding pocket knife (Police model # 1007R-PLN Stainless steel Sharp blade length = 3 �� (4 1/8� to handle) Brand new in box $89 Exceptionally fine tool for general purpose. Ken (209) 536-1114

plasma cutter (modesto) $375

2008-05-13T12:36:35-07:00

RAMSOND CUT 40DX PLASMA CUTTER
BRAND NEW USED FOR ONE CUT!!!!
WORKS GREAT.
209-495-0273

Stainless Steel BELT BUCKLES (Sonora) $43

2008-05-13T12:26:14-07:00

Stainless Steel BELT BUCKLES $43 and up Heavy Duty Handmade brand new, in both 1�� & 1�� Belts A superb defense tool while traveling. I also make some in Solid Brass. Ken (209) 536-1114 Sonora See: www. ExpeditionDepot. com

Romex Elect. Wire 10 -3 + Ground (Sonora) $129

2008-05-13T12:25:36-07:00

ELECTRIC WIRE Romex #10 3+Ground 250 Feet Unopened roll $129 Ken 536-1114 Sonora torsten(at)sonnet. com

RADIAL ARM SAW 10� Craftsman (Sonora) $39

2008-05-13T12:25:07-07:00

RADIAL ARM SAW 10� Craftsman These saws can cross-cut (as blocking), rip, compound cut, dado�at any angle. I have two--take your pick. 1st one for sale at only $39. The other one I want to keep. Ken 536-1114 Sonora torsten(at)sonnet. com

Table Saw Motor $40

2008-05-12T21:42:54-07:00

3 Horse Motor For 10 Inch Craftsman Table Saw Like New

5 HP CRAFTSMAN FRONT 24" TINE ROTOTILLER - FOR SALE @ (MODESTO) $259

2008-05-12T20:52:14-07:00

Briggs & Stratton Engine
Similar Models & New sold for $359 - $399.
Good condition. Not used much. One owner.
Arrange for Local Pickup
Will fire it up & start engine for demo.
Price or Best Offer. Call to offer - leave message.
Call Dave @ (209) 551-5012. Leave message.

welding tank 40 cubic-feet (Modesto) $135

2008-05-12T19:14:51-07:00

Perfect for the hobby welder. This tank will complement your miller / lincoln mig welder. Forget about the flux core stuff, once I started using mig with gas, I was hooked!!

Drill (Turlock) $10

2008-05-12T18:20:21-07:00

Craftsman industrial 3/8" screwdriver/drill 4.5A 120V AC ONLY 0-1200 RPM

husqvarna trimmer (stockton) $260

2008-05-12T17:16:38-07:00

husqvarna commercial trimmer 324lx an excellen condition. it is only 6 month old this is a 4 stroke engine !!!! straight gas!!!! no mix needed. 1.1 hp tap n go for info send an e-mail

$240.00 HOMEDEPOT GIFT CARD (MODESTO) $170

2008-05-12T16:03:26-07:00

$240.00 GIFTCARD, I HAVE NO USE FOR IT , WILL MEET AT MODESTO OR RIVERBANK HOMEDEPOT TO VERIFY IF NEEDED ALSO HAVE RECEIPT. $170.00 OR O.B.O. 496-7565, TEXMSSGE WOULD BE BEST

OXYGEN ACETYLENE TANK (LATHROP) $500

2008-05-12T15:35:32-07:00

OXYGEN ACETYLENE TORCH SET ON A CART. TORCHE SET BRAND NEW, ONLY USED 2 TIMES. BOTH TANKS ARE FULL. HOSES AND GAGES ARE BRAND NEW. ASKING 500 OBO. PLEASE CALL MIKE AT 209-858-4276 WITH ANY QUESTIONS

DRILL PRESS (LATHROP) $85

2008-05-12T15:35:21-07:00

ADJUSTABLE SPEED DRILL PRESS. $80 OBO, CALL MIKE AT 209-858-4276

RADIAL ARM SAW (LATHROP) $175

2008-05-12T15:35:04-07:00

RAIDAL ARM SAW. WORKS GREAT. $175 OBO. CALL MIKE AT 209-858-4276

2) SNAP ON Roller Cabinet, 30" w/40"h/20"d * BRAND NEW-STILL IN BOX* (turlock) $600

2008-05-12T14:51:27-07:00

7 DRAWER UNITS. 1,120 LB LOAD CAPACITY. 2) 2" FULL LENGTH DRAWERS, 3) 3" FULL LENGTH DRAWERS, 1) 6" FULL LENGTH DRAWER, 1) 8" FULL LENGTH DRAWER.
* $1k list price, need to SELL SOON!!!!!!!!!!
* CASE sticker is removable.
* I can transport if local or arrange for freight service delivery.
* Double-wall steel construction provides strength and durability to support loaded drawers so they stay level.
* Full length stiffner under the cover is welded to sides of the cover to provide the strongest top cover available to minimize the racking.
* Extra deep drawer pulls give more finger room (almost 1") to comfortably pull the drawer.
* Rolled edges on drawers add strength, rigidity and safety.
* Ball-bearing slides provide extra weight support with smooth, one-hand operation.
* Ergonomic handle design provides comfortable gripping and ease of maneuvering.
* Gussets on corners improve cabinet strength so the cabinet stays square.
* Drawer liners included.
* caster plates and weldnuts keep casters tight for smooth rolling-caster screws pall through double thick steel plates and pre-threaded weldnuts.
Call me anytime! Ben 209-649-3870

Pipe Freezing Tool (For plumbing repair) (Modesto) $200

2008-05-12T14:17:25-07:00

General Cold Shot Pipe Freeze kit.

Call Mark @ Trice Plumbing 524 8312

Traffic Cones (Modesto) $5

2008-05-12T14:17:10-07:00

I have about 15 traffic cones $ 5:00 each

Call Mark @Trice Plumbing 524 8312

Radial arm saw 10" (Manteca) $300

2008-05-12T12:31:12-07:00

Computerized 10" radial arm saw with 6 drawer base. Excellent condition. Extra blades. $300.00 Call 209-239-8804.

Arc Welder on Trailer project almost done (sonora) $300

2008-05-12T12:23:46-07:00

1950 Lincoln Arc Welder SAE 300, needs work. needs water pump collar,starter battery. Rebuilt, these welders go for $2500 minimum on ebay. Trailer good and tires good. Leads to welder good, new spark plugs and some wiring new. Will start. Contact Andrew at 209-352-8230 if interested or you have questions. There is no top on the welder in pic. I do have the top and am painting it black.

Saftey Scope and Road Sign (modesto) $50

2008-05-12T12:07:39-07:00

Telescoping Road sign works good call Robert 209-602-7724

codes scanner (93610) $150

2008-05-12T11:38:51-07:00

have a obd 2 scanner for sale used only 1 time and then put away cause i left to iraq and now i dont need it. does more then reads codes it will run data streams and pending code drive cycles monitors O2's and more asking 150 obo 5597188462

Cable Cutters (modesto) $60

2008-05-12T11:29:17-07:00

large cutters good cond. call Robert 209-602-7724

Dry Nitrogen Gauge (Modesto) $40

2008-05-12T10:16:03-07:00

Gauge and buffer hose call Robert 209-602-7724

Telcom 710 Spliceing Head (Modesto) $275

2008-05-12T10:15:22-07:00

710 spliceing head good shape ,has blade call Robert at 209-602-7724

Lanyard (Modesto ) $40

2008-05-12T09:43:49-07:00

Manyard Shock absorbing Lanyard like new. Call Robert 209-602-7724

Transmission Flush Machine (modesto) $900

2008-05-12T09:43:29-07:00

Transmission flush machine was used almost 2 years until shop went out of business. It works perfectly and has tranny line attachments for most cars and trucks. Automatically stops when finished and has a top off, and drain pan features. Made by QMI Everwear. Asking $900 or best offer. Also have a coolant flush ,machine. If interested, e-mail mike at mikesalltune2059@yahoo.com. I also have many more shop tools and inventory if interested.

Automotive Coolant Flush Machine (modesto) $700

2008-05-12T09:43:15-07:00

Coolant flush machine was used for almost 2 years until business went under. Machine works great and looks new. Has attachments to fit most cars and trucks and I also have a few flush chemicals I will give with machine. Asking $700 or best offer. E-mail Mike at mikesalltune2059@yahoo.com if you would like to set up time to see it.

Air compressor and table and router table (MODESTO) $200

2008-05-11T19:46:56-07:00

i have a compressor and only used it a couple of times it runs off 220 amps works good i dont need it any more also have a work table and a router table if intrested call me at 510 385-0535 my nane is ben.

Karcher 1600 PSI Electric Pressure Washer (Turlock) $150

2008-05-11T18:06:20-07:00

Hey everyone i got a BRAND NEW IN BOX NEVER EVER OPENED Karcher 1600 PSI electric pressure washer. got it as a gift but im never gonna use it so i decided to sell it. the straps are still wrapped around the box. This is a great deal im only asking $150. if interested please let me know thanks. serious buyers only please

12" Table saw (Modesto) $400

2008-05-11T17:22:08-07:00

12" table saw for sale. 2hp 110/220v motor (now wired for 220v single phase w/ 30 ft 10ga cord). 2 rip & 1 crosscut blades & ripfence included. Theres some rust on the top but surface only- no damage. Works great- lots of power! Make me an offer.

Makita belt sander $40

2008-05-11T15:25:31-07:00

I have a used Makita belt sander, works perfectly well.

Skil orbital jigsaw $25

2008-05-11T15:23:19-07:00

I have a Skil orbital jigsaw like new in carrying case.

Craftsman circular saw $50

2008-05-11T15:20:32-07:00

I have a 7-1/4" 15amp. Craftsaman circular saw like new in carrying case.

HONDA 8.0hp powered multiquip generator (modesto) $350

2008-05-11T14:39:26-07:00

honda powered generator 8.0 overhead valve motor gx-240 model generator is multiquip 3600 works good runs 110/120 and 220/240
$350 obo or trade for rifle or pistol

GUILD A-6 SAW (MODESTO) $20

2008-05-11T11:09:20-07:00

VINTAGE GUILD MODEL A-6 SKILL SAW...WITH ORIGINAL METAL CARRYING CASE. FOR LOCATION AND/OR MORE INFORMATION CALL 409-9847

Brand new Dewalt drill gun with extra !!! never opened 250 cash $250

2008-05-11T10:48:23-07:00

brand new Dewalt drill gun, comes with extra battery. received as a present but already have one.

worth 399 . my price 250 cash ...

merced here my cell 408-529-9342

tool boxes (modesto) $80

2008-05-11T09:25:43-07:00

today i'm selling this top and bottom tool boxes for 100.00 if you are interested in them give me a call 209-492-0521

Woodworking Tools 12 Items Dewalt , Hitach , Emglo , Porta-Cable More (Modesto) $500

2008-05-11T09:18:09-07:00

Hitachi C8FB2 8-1/2 Compound Slide Miter Saw with 2 blades <$200>

Senco Finish Nail Gun Only used on a few jobs <$100>

Emglo Compressor Older but works great <$75>

Porta-Cable 3x21 Belt Sander works great <$75>

Porta-Cable D-handle Router works great but no switch on base <$50>

Milwaukee Drill works great <$40>

Mikta Angle Grinder works great <$30>

Brad Nailer works great <$20>

Dewalt Palm Sander works great <$15>

Cord and Air hose <$10>

Open To Reasonable Offers or Take All For $500
Call Steve @ 209 345 3138

Have More Picz if needed

wall heater for garage or shop (modesto) $10

2008-05-10T20:41:42-07:00

20 amp 220 electric-works great on and off, no thermostat.Kevin 209-652-4183

hitch or bumper mount vise-made in USA (modesto) $30

2008-05-10T20:39:03-07:00

nice shape with pipe jaws or 3.5" flat jaws-works great.Kevin 209-652-4183

Table Saw $100

2008-05-10T19:09:46-07:00

Table Saw for sale $100 obo 550-0569

makita miter saw and grinder (modesto) $50

2008-05-10T15:52:03-07:00

older 10" makita miter saw works good and a makita grinder also works good package deal need to sale right now!!! $50 for the both call (209)537-8538 and ask for JASON

briggs and stratton 5550 10 hp generator (manteca) $600

2008-05-10T14:00:17-07:00

brand new 8550 starting watts 5550 continuous watts 10 hp generator.large wheels and handle for easy transport.has 4 weather proof lighted 120voutlets,circuit breaker with120/240 outlet.removeable fuel tank.model #030324.never used to power anything.I bought it to power a/c on travel trailer,I sold trailer.paid over 700 from home depot.$600 or best offer 209-499-2710

Air Compressor (Modesto) $100

2008-05-10T12:32:43-07:00

Air Compressor, 6 Gallon, hand carry, 2HP, like NEW, 25ft hose $100.00/OBO

Call Ray @ 209-595-3833

Tools, Equipment, Ladders, Ropes, and Weights (Modesto and surroundings)

2008-05-10T12:00:07-07:00

FOLLOWING GOES FOR $300.00 ALL TOGETHER
2 SETS OF ROPE FALLS COMPLETE WITH ROPES
BLACK AND TAKLESS- 4HOOKS
2 LARGE 100 FEET TIDE BACK ROPES
2SETS = 4 LADDEER JACKS ALUMINUM

INDIVIDUAL BUY
50 FOOT A1 CLASS EXTENTI0N ALUMINUM LADDER - $110
24 FOOT THICK ALL ALUMINUM PLANK - $100
24 FOOT EXTENTION ALUMINUM LADDER - $100
1 SINGLE ROPE FALL WITH BOSSMEN CHAIR - $55
SMALL PLANK THAT IS SLIGHTLY BROKEN GIVE AWAY WITH PURCHASE

BENCH,BAR, AND WEIGHTS - $70
ABS MACHINE - $50

OR MAKE YOUR BEST OFFER, FAMILY EMERGANCY SO NEEDS TO SELL ASAP. THANKS FOR LOOKING

50 ton hydraulic press (Turlock) $3500

2008-05-10T11:43:53-07:00

This is a heavyweight hydraulic press. If u would like info, please feel free to call: Work (Ask for Wilson):209-669-1430 Cellphone:209-620-1451 ****** here are some Pictures: Click on a photo to make bigger.

Dean Smith & Grace LTD Engine Lathe 17"x69" (Turlock) $8000

2008-05-10T11:43:18-07:00

Dean Smith & Grace LTD Engine Lathe with Digital Sargon Readout. Taper Turning Atachmant included. Cross stop included. Exelent condition-made in England. Price:$8,000 O.B.O. Call Wilson at C&W Machine Shop: 209-669-1430 or 209-620-1451

thick wire for fences!!! or anything else!!!! (turlock) $85

2008-05-10T08:52:38-07:00

i ahev this wire just siting in m y garage and need to get rid of it...dont how much it is but its really heavy. can use for gates of fences or idk. im askin $85obo call me at 209-669-3784 call cristian

Craftsman 18" 42cc chainsaw-runs perfect (modesto) $75

2008-05-10T07:34:09-07:00

starts and runs excellent, I bought a larger one and don't need this anymore.Kevin 209-652-4183

KNAACK DIAMOND PLATE ALUM. ALL WEATHER JOB TOOL BOX $250 (RIPON) $225

2008-05-10T06:37:00-07:00

THE All-Purpose Chest-Aluminum ITS A Model: 630 Jumbo All-Purpose Chest -ALL Aluminum
Dimensions: H: 30 1/4 W: 30 1/4 L: 49 1/4
(Cubic Feet: 24)
Weight: 100.00 lbs -- RETAILS FOR CLOSE TO $700 --CALL 209-662-3798--- FOR SAFE STORAGE OF AIR IMPACT CONSTUCTION CONTRACTOR TOOLS. PAINTING ROOFING CEMENT CONCRETE PLUMBING LANDSCAPING GARDENER HEATING AND AIR CONDITIONING HANDY MAN BOX. IT DOES HAVE A SMALL DENT ON THE BOTTOM EDGE

Pro Tape 16' Digital Tape Measure (Tracy) $10

2008-05-09T20:25:58-07:00

This is a tape measure where you do not read the tape. You read the digital screen on the side of the body of the tape measure. The tape goes to 16 feet long and is accurate to 1/16th of an inch.

Rocky
925-216-7692 cell
Tape is located in Tracy but can be seen in Hayward by prior arrangement.

56"stainless 9 drawer top box (Tracy) $500

2008-05-09T18:30:19-07:00

selling my stainless 9 drawer top box with closing lid and locks,it is 56 inches wide and 19 inches deep please contact ed @ 209-740-2215 or edestante2001@yahoo.com

stand for engine (empire) $35

2008-05-09T18:30:17-07:00

like new used one time $35.00 firm (209)496-8406

engine hoist (empire) $100

2008-05-09T18:27:59-07:00

foldable used once and firm $100.00 (209)496-8406

HILTI PR 60 Laser Level (Ceres) $300

2008-05-09T18:07:10-07:00

I am selling a Hilti PR 60 Laser Level. Pictures are available upon request. Make me an offer!! Jcary@hotmail.com

CAR JACK (MODESTO) $10

2008-05-09T17:35:59-07:00

CAR JACK WORKS $10.00 CALL (209)499-3158 OR EMAIL

Craftsman Quickswap Knee Pads (Stockton) $20

2008-05-09T17:00:17-07:00

These are brand new in box.

It contains one pair knee pads with swivel pads, with 2 all-terrain caps. They have an air injected gel core.

Craftsman 5 x 2 in. Caster Set (Stockton) $25

2008-05-09T16:59:23-07:00

4 pc. set features two swivel casters with toe brakes and two rigid casters. For replacement of 5 x 2 in. casters only on Craftsman roll-aways, excluding Craftsman Professional.

Fit any Craftsman 26, 40 or 52 in. professional quality or ball-bearing roll-away
Constructed of durable material for rugged use and long life
Heavy duty casters roll smoothly over uneven shop floors
Quality accessories improve the performance and versatility of your storage equipment
Two swivel casters with toe brakes for increased mobility and stability

Craftsman 4 Drawer Tool Storage Box (Stockton) $20

2008-05-09T16:58:41-07:00

Fitted to hold tools for 244 pc, 283 pc or 290 pc tool sets; plus additional storage for wrenches, nut drivers and screwdrivers (tools not included). Drawers separated by drive size for easy removal to the job. Made of lightweight high density polyethylene resists rust. Top or side grasp for convenient handling.